PRODUCT DATA SHEET ACID RESISTANT CUSTOM SHAPES BRICK & TILE

Material:          Acid Resistant CUSTOM SHAPES (RED SHALE OR FIRECLAY)

Size (mm):       END ARCH, CHAMFERED HEADER, CHAMFERED STRECHER,

VERTICLE AND HORIZONTAL BULLNOSED, CORBAL BRICK,

COVED SKIRTING TILE, CORNER BRICK, SLEEVES, BEAMS

ANY SHAPES PROVIDED BY CLIENT/PURCHASER

Specification:    ASTM C279, ASTM C410, ASTM C980, IS 4457-2007, IS 4860-1982

  1. DESCRIPTION:

Khodiyar Acid CUSTOM SHAPES complies with ASTM C279, ASTM C410, ASTM C980 & INDIAN STANDARD 4860-1982, 4457-2007 for use where lower absorption and higher acid resistance are required. Industrial red shale or fire clay CUSTOM SHAPES, resistant to acid, alkalis, solvents,high mechanical and thermal stress.

  1. FEATURES OF KHODIYAR INDUSTRIAL CUSTOM SHAPES:

Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature.

AREA OF APPLICATION:                                                                                     Chemical Analysis (Average)

  • Acid and Alkali Storage Tank Farms
  • Demineralization plants and Water treatment plants
  • Chimney inside lining, FGD linings
  • Towers and Columns
  • Process Vessels and Tanks
  • Sewerage Treatment Plants and Lines
  • Industrial Flooring and Bund Areas
  • Chimney and Flue Gas Linings
  • Hoppers and Chutes
  • SiO266.4
  • Al2 0324
  • TiO21.1
  • Fe2 O31.1
  • K2 O + Na2 O2.5
  •  
  • NOT RECOMMENDED:
  • HF acid or other fluoride solutions
  • Heavy thermal shock
Typical Physical Properties of Khodiyar Acid and Chemical Resistant CUSTOM SHAPES BRICK
Characteristic Fireclay Red Shale Test Standard
Bulk Density, lbs/ft3 2.25 to   2.30 2.30 to   2.35 ASTM C-20
Water Absorption, % 0.1 to   1.8 0.1 to   1.5 ASTM C-20
Apparent Porosity, % 4.05 to   4.14 2.3 to   3.45 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% 0.1 to   1.8 0.1 to   1.8 ASTM C-279
Modulus of Rupture, PSI 2133 to   3555 2844 to   3600 ASTM C-67
Compressive Strength, PSI 21447 to   22757 22411 to   23125 ASTM C-67
Abrasion Resistant , Volume in mm3 71 to   96 69 to   85 EN 102
Surface Hardness, MOHS Scale 7 7
Thermal Conductivity, BTU-in/hr-ft²-°F 6.94 to   7.12 7.1 to   8.9 ASTM C-236
Thermal Expansion Coefficient,in/in/°Fx10-6 2.6 to   2.8 3.1 to 4.6 EN 103
Typical Physical Properties of Khodiyar Acid and Chemical Resistant CUSTOM SHAPES TILE
Characteristic Fireclay Red Shale Test Standard
Bulk Density, lbs/ft3 2.25 to   2.30 2.30 to   2.35 ASTM C-20
Water Absorption, % 0.1 to   0.5 0.1 to   0.5 ASTM C-20
Acid Solubility (H2SO4), Loss in Mass,% 0.1 to   1.5 0.1 to   1.5 ASTM C-279
Modulus of Rupture, MPa 35 to   37 35 to   39 IS 4457-2007
Abrasion Resistant , Volume in mm3 71 to   89 69 to 95 IS 4457-2007
Surface Hardness, MOHS Scale 7 7
Thermal Conductivity, BTU-in/hr-ft²-°F 6.94 to   7.12 7.1 to   8.9 ASTM C-236
Thermal Expansion Coefficient,in/in/°Fx10-6 2.6 to   2.8 3.1 to 4.6 EN 103
  1. The requirement for resistance to wear is only optional and shall be carried out if required by the purchaser.
  2. The customer must comply strictly with the instructions contained in this product data sheet. Khodiyar is not responsible for any advice or variations to this data sheet which is not confirmed in writing.
  3. If the customer has a claim against Khodiyar in respect of any product supplied to the customer by Khodiyar whether due to a fault in the product or the negligence or breach of contract by Khodiyar or for any other reason:
    1. Khodiyar shall not be liable for any loss of damage including consequential loss or damage or loss of profits arising thereby;
    2. Khodiyar may at its option replace the defective product free of charge to the customer or refund all payments made to it by the buyer in respect of the defective product; and the maximum liability of Khodiyar shall be the cost of replacing the defective product.

ISO 9001: QUALITY MANUFACTURER OF ACID RESISTANT CUSTOM SHAPES AND TILES SINCE 1995

           q1     q3

RequestFree Quote

CUSTOM SHAPE ACID BRICK

ACID RESISTANT CUSTOM BRICK

CUSTOM BRICK SPECIFICATIONS

ACID TILES TONGUE AND GROOVE

ACID TILES - COVED SKIRTING

ACID RESISTANT CORBAL BLOCK